Water damage in Nellis AFB properties rarely stays where it originated. It migrates through wall framing, saturates subfloor assemblies, moves along structural members, and collects in ceiling cavities — creating hidden moisture pockets that show no visible surface signs but create ideal conditions for mold growth within 48-72 hours. COS Water Damage Restoration's Nellis AFB inspection team uses FLIR thermal imaging, calibrated pin-type and non-penetrating moisture meters, and systematic structural assessment protocols to map water migration through your property completely — before remediation begins or before you close on a purchase.
A credible water damage inspection in Nellis AFB does more than identify where the water is visible. It traces where the water went — through structural assemblies, behind finishes, and into below-grade spaces — and produces a written, defensible assessment you can act on or present to an insurance carrier, a buyer, or a remediation contractor.
FLIR infrared thermal cameras detect temperature differentials in structural surfaces — a wet wall cavity cools differently than a dry one during evaporation, making moisture migration visible as a thermal signature even behind intact drywall. Our Nellis AFB inspection team uses thermal imaging as the primary tool for tracing water migration paths through wall systems, subfloor assemblies, and ceiling cavities, identifying affected areas before a single pin is driven into a wall.
Thermal imaging shows probable moisture — calibrated moisture meters confirm it. Our Nellis AFB inspectors use both pin-type meters (direct reading in framing and structural members) and non-penetrating radio-frequency meters (surface reading through drywall and flooring) to take quantified moisture content readings at all thermal-identified locations. These readings are recorded at labeled sensor points and become the data basis for the written inspection report.
Every COS Water Damage Restoration Nellis AFB water damage inspection produces a written report: affected area descriptions, thermal images with annotations, moisture meter readings at labeled sensor points, water category determination (Cat 1/2/3), and a recommended scope of work with priority sequencing. Reports are formatted to be useful to your insurance carrier, a remediation contractor, or a real estate transaction where water damage disclosure is at issue.
Both use cases are available in Nellis AFB — contact us with your specific situation and our inspector will scope the right assessment.
Here are the specific inspection scenarios and assembly types our Nellis AFB team handles.
When a water damage event has just occurred in a Nellis AFB property — or happened within the last several days — our inspection maps the full extent of saturation while the moisture is still detectable by thermal imaging and direct meter readings. This inspection is the foundation of the remediation scope and the insurance claim documentation. Without it, remediation crews are guessing at what to dry, and insurance carriers are estimating on incomplete data. Our Nellis AFB active event inspection captures the full saturation picture at the moment of peak detectable moisture — when the readings tell the most accurate story of what happened.
Real estate transactions in Nellis AFB frequently involve properties with prior water events — disclosed and undisclosed. Our pre-purchase inspection uses thermal imaging and moisture meters to identify active moisture in structural assemblies, staining patterns consistent with prior water intrusion, and the condition of previous remediation. For Nellis AFB buyers, this inspection provides either confidence that a disclosed water event was properly handled, or documentation that it was not — giving the buyer negotiating leverage and a clear picture of what additional remediation cost, if any, is warranted.
Post-remediation verification is an independent assessment — not a rubber stamp.
Mold risk assessment in Nellis AFB is distinct from air quality testing. We assess structural conditions and visible evidence — not air samples.
Below-grade spaces in Nellis AFB properties — crawlspaces, basement areas, and below-slab conditions — are among the most common locations for chronic moisture problems to go undetected. Our Nellis AFB below-grade inspection covers crawlspace wood framing moisture content readings at joists and beams, vapor barrier condition and coverage, condensation evidence on structural surfaces, and visual assessment for wood rot, fungal growth, and pest damage associated with chronic moisture. Written findings document the below-grade condition for remediation scoping or real estate disclosure.
Our Nellis AFB inspection reports are formatted to the documentation standards that insurance carriers use to evaluate water damage claims in NV.


Same-day scheduling available for active water events. Pre-purchase inspections booked on your transaction timeline.
Systematic, instrument-driven, fully documented during the on-site session.
You understand what was found before you receive the written report.
The written inspection report — thermal images with annotations, sensor point readings mapped to a floor plan, water category determination, and recommended scope — is delivered within 24-48 hours of the on-site session, formatted for insurance, remediation, or real estate use as appropriate to your situation. We're available to answer adjuster or real estate agent questions about the findings.



"The thermal imaging session was what sold me on how a proper Nellis AFB water damage inspection should work. Our inspector traced water migration I never could have guessed at — the event in the utility room had spread moisture into the adjacent storage room wall framing more than twelve feet away. The written report documented all of it and our remediation contractor used it directly to scope the drying project."
"We used the COS Water Damage Restoration Nellis AFB inspection report to file a homeowner's claim for a water damage event. The adjuster reviewed the thermal image documentation and sensor point readings and approved the full remediation scope on first submission. The inspection report paid for itself many times over by eliminating the supplement process."
"We manage a portfolio of Nellis AFB rental properties and COS Water Damage Restoration's inspection service is what we use every time a water event is reported, prior to any remediation starting. The inspection report maps the damage completely — it's what we give our remediation contractor as the scope of work and what we give our insurer as the damage documentation. Having a consistent, instrument-backed inspection process has eliminated the disputes we used to have about whether remediation was complete or whether the damage scope matched what we claimed."
COS Water Damage Restoration's certified inspection team serves Nellis AFB and surrounding communities throughout NV. Call +1-844-499-0972 to schedule your Nellis AFB inspection.
Whether you need inspection for an active event, a purchase, or post-remediation verification — our Nellis AFB team produces a written, instrument-backed report. Call +1-844-499-0972 to schedule.
📞 Call +1-844-499-0972 — Schedule Nellis AFB InspectionIICRC Certified · FLIR Thermal Imaging · Written Reports · Nellis AFB, NV